Access 2010錯誤編號和錯誤描述匯總
- 2020-03-28 08:00:00
- tmtony8 原創
- 10275
下面是 Access 2010的所有2976個錯誤代碼和描述的列表。從錯誤號3到32682的范圍，每個錯誤代碼描述不同的內容。
某些描述帶有（例如" | "和 "@"）這些標記的，已由Access替換為特定錯誤的文本。
| 錯誤編號 | 錯誤英文描述 | 錯誤中文說明 |
| 3 | Return without GoSub | 沒有GoSub的退貨 |
| 5 | Invalid procedure call or argument | 無效的過程調用或參數 |
| 6 | Overflow | 溢出 |
| 7 | Out of memory | 內存不足 |
| 9 | Subscript out of range | 下標超出范圍 |
| 10 | This array is fixed or temporarily locked | 該數組是固定的或臨時鎖定的 |
| 11 | Division by zero | 被零除 |
| 13 | Type mismatch | 類型不匹配 |
| 14 | Out of string space | 字串空間不足 |
| 16 | Expression too complex | 表情太復雜 |
| 17 | Can't perform requested operation | 無法執行請求的操作 |
| 18 | User interrupt occurred | 發生用戶中斷 |
| 20 | Resume without error | 恢復無誤 |
| 28 | Out of stack space | 堆棧空間不足 |
| 35 | Sub or Function not defined | 子或功能未定義 |
| 47 | Too many DLL application clients | DLL應用程序客戶端過多 |
| 48 | Error in loading DLL.Here are some Microsoft KB articles .ACC2000: Error Message When Running Access Wizardscovering this error. The articles were written for specific versions of Access, but may apply to later versions.Error message when you run a Microsoft Access wizard in Access 2002 | 加載DLL時出錯，這是一些有關此錯誤的Microsoft KB文章。這些文章是針對Access的特定版本編寫的，但可能適用于更高版本。運行訪問向?qū)r(shí)ACC2000：錯誤消息， |
| 49 | Bad DLL calling convention | 錯誤的DLL調用約定 |
| 51 | Internal error | 內部錯誤 |
| 52 | Bad file name or number | 錯誤的文件名或編號 |
| 53 | File not found | 文件未找到 |
| 54 | Bad file mode | 錯誤檔案模式 |
| 55 | File already open | 文件已打開 |
| 57 | Device I/O error | 設備I / O錯誤 |
| 58 | File already exists | 文件已存在 |
| 59 | Bad record length | 記錄長度錯誤 |
| 61 | Disk full | 磁盤已滿 |
| 62 | Input past end of file | 輸入文件末尾 |
| 63 | Bad record number | 不良記錄號 |
| 67 | Too many files | 文件太多 |
| 68 | Device unavailable | 設備不可用 |
| 70 | Permission denied | 沒有權限 |
| 71 | Disk not ready | 磁盤未準備好 |
| 74 | Can't rename with different drive | 無法使用其他驅動器重命名 |
| 75 | Path/File access error | 路徑/文件訪問錯誤 |
| 76 | Path not found | 找不到路徑 |
| 91 | Object variable or With block variable not set | 未設置對象變量或帶塊變量 |
| 92 | For loop not initialized | For循環未初始化 |
| 93 | Invalid pattern string | 模式字符串無效 |
| 94 | Invalid use of Null | 無效使用Null |
| 96 | Unable to sink events of object because the object is already firing events to the maximum number of event receivers that it supports | 無法下沉對象的事件，因?yàn)閷?duì)象已經將事件觸發到其支持的最大事件接收器數 |
| 97 | Can not call friend function on object which is not an instance of defining class | 無法在不是定義類實例的對象上調用好友函數 |
| 98 | A property or method call cannot include a reference to a private object, either as an argument or as a return value | 屬性或方法調用不能以參數或返回值的形式包含對私有對象的引用 |
| 321 | Invalid file format | 檔案格式無效 |
| 322 | Can't create necessary temporary file | 無法創建必要的臨時文件 |
| 325 | Invalid format in resource file | 資源文件中格式無效 |
| 380 | Invalid property value | 無效的屬性值 |
| 381 | Invalid property array index | 無效的屬性數組索引 |
| 382 | Set not supported at runtime | 運行時不支持該設置 |
| 383 | Set not supported (read-only property) | 設置不受支持（只讀屬性） |
| 385 | Need property array index | 需要屬性數組索引 |
| 387 | Set not permitted | 不允許設置 |
| 393 | Get not supported at runtime | 在運行時不支持 |
| 394 | Get not supported (write-only property) | 獲取不受支持的（僅寫屬性） |
| 422 | Property not found | 找不到財產 |
| 423 | Property or method not found | 找不到屬性或方法 |
| 424 | Object required | 所需對象 |
| 429 | ActiveX component can't create object | ActiveX組件無法創建對象 |
| 430 | Class does not support Automation or does not support expected interface | 類不支持自動化或不支持預期的接口 |
| 432 | File name or class name not found during Automation operation | 在自動化操作期間找不到文件名或類名 |
| 438 | Object doesn't support this property or method | 對象不支持此屬性或方法 |
| 440 | Automation error | 自動化錯誤 |
| 442 | Connection to type library or object library for remote process has been lost. Press OK for dialog to remove reference. | 到遠程處理的類型庫或?qū)ο髱?kù)的連接已丟失。按確定以刪除參考。 |
| 443 | Automation object does not have a default value | 自動化對象沒有默認值 |
| 445 | Object doesn't support this action | 對象不支持此操作 |
| 446 | Object doesn't support named arguments | 對象不支持命名參數 |
| 447 | Object doesn't support current locale setting | 對象不支持當前的語言環境設置 |
| 448 | Named argument not found | 找不到命名參數 |
| 449 | Argument not optional | 參數不可選 |
| 450 | Wrong number of arguments or invalid property assignment | 參數數量錯誤或?qū)傩苑峙錈o(wú)效 |
| 451 | Property let procedure not defined and property get procedure did not return an object | 屬性讓過程未定義，屬性獲取過程未返回對象 |
| 452 | Invalid ordinal | 無效的序數 |
| 453 | Specified DLL function not found | 找不到指定的DLL函數 |
| 454 | Code resource not found | 找不到代碼資源 |
| 455 | Code resource lock error | 代碼資源鎖定錯誤 |
| 457 | This key is already associated with an element of this collection | 該密鑰已經與此集合的元素相關聯 |
| 458 | Variable uses an Automation type not supported in Visual Basic | 變量使用Visual Basic不支持的自動化類型 |
| 459 | Object or class does not support the set of events | 對象或類不支持事件集 |
| 460 | Invalid clipboard format | 剪貼板格式無效 |
| 461 | Method or data member not found | 找不到方法或數據成員 |
| 462 | The remote server machine does not exist or is unavailable | 遠程服務器計算機不存在或不可用 |
| 463 | Class not registered on local machine | 未在本地計算機上注冊的課程 |
| 481 | Invalid picture | 圖片無效 |
| 482 | Printer error | 打印機錯誤 |
| 735 | Can't save file to TEMP | 無法將文件保存到TEMP |
| 744 | Search text not found | 找不到搜索文字 |
| 746 | Replacements too long | 更換時間過長 |
| 2001 | You canceled the previous operation.@@@1@2@5738@1 | 您取消了上一個操作。@@@ 1 @ 2 @ 5738 @ 1 |
| 2002 | You tried to perform an operation involving a function or feature that was not installed in this version of Microsoft Access.@@@1@@@1 | 您試圖執行涉及此版本Microsoft Access中未安裝的功能的功能的操作。@@@@ 1 @@@ 1 |
| 2004 | There isn't enough memory to perform this operation. Close unneeded programs and try the operation again. | 沒有足夠的內存來執行此操作。關閉不需要的程序，然后重試該操作。 |
| 2005 | There isn't enough free memory to start Microsoft Access.@Close unneeded programs and try again. For information on freeing memory, search the Microsoft Windows Help index for 'memory, troubleshooting'.@@1@@@3 | 沒有足夠的可用內存來啟動Microsoft Access。@關閉不需要的程序，然后重試。有關釋放內存的信息，請?jiān)贛icrosoft Windows幫助索引中搜索“內存，故障排除”。@@ 1 @@@@ 3 |
| 2006 | The object name '|1' you entered doesn't follow Microsoft Access object-naming rules.@For more information about naming objects, click Help.@@2@1@553714184@1 | 您輸入的對象名稱“ | 1”不符合Microsoft Access對象命名規則。@有關命名對象的更多信息，請單擊“幫助”。@@ 2 @ 1 @ 553714184 @ 1 |
| 2007 | You already have an open database object named '|.'@Use a different name for each database object of the same type. If you want this object to replace the original object, close the original object, and then save this object using the same name. For more information on renaming a database object, click Help.@@2@1@9043@1 | 您已經有一個名為'|。'的打開的數據庫對象。@對相同類型的每個數據庫對象使用不同的名稱。如果要此對象替換原始對象，請關閉原始對象，然后使用相同的名稱保存該對象。有關重命名數據庫對象的更多信息，請單擊Help。@@ 2 @ 1 @ 9043 @ 1 |
| 2008 | You can't delete the database object '|' while it's open.@Close the database object, and then delete it.@@1@@@1 | 您無法刪除數據庫對象“ |” 打開時@關閉數據庫對象，然后將其刪除。@@ 1 @@@ 1 |
| 2009 | You can't rename the database object '|' while it's open.@Close the database object, and then rename it.@@1@@@1 | 您不能重命名數據庫對象“ |” 打開時@關閉數據庫對象，然后重命名。@@ 1 @@@ 1 |
| 2010 | You can't delete the database object '|' while it's open.@Close the database object, and then delete it.@@1@@@1 | 您無法刪除數據庫對象“ |” 打開時@關閉數據庫對象，然后將其刪除。@@ 1 @@@ 1 |
| 2011 | The password you entered is incorrect. | 您輸入密碼不正確。 |
| 2014 | You have given this |1 the same name as an existing |2 in your database.@You can't give a table and a query the same name.@Give this object a name that isn't already used by another table or query.@1@@@1 | |已為該| 1提供與數據庫中現有的| 2相同的名稱。@您不能為表和查詢賦予相同的名稱。@為該對象提供另一個表或查詢尚未使用的名稱。 。@ 1 @@@ 1 |
| 2015 | There are no registered wizards of this type.@Rerun Microsoft Access or Microsoft Office Setup to reinstall the wizards. If you want to preserve your security or custom settings, back up the Microsoft Access workgroup information file. For more information on backing up files, search the Microsoft Windows Help index for 'backing up files'.@@1@@@1 | 沒有這種類型的注冊向?qū)?。@重新運行Microsoft Access或Microsoft Office安裝程序以重新安裝向?qū)?。如果要保留安全性或自定義設置，請備份Microsoft Access工作組信息文件。有關備份文件的更多信息，請?jiān)贛icrosoft Windows幫助索引中搜索“備份文件”。@@ 1 @@@@ 1 |
| 2016 | You can't modify the attributes of System Tables. | 您不能修改系統表的屬性。 |
| 2017 | Microsoft helps protect this Visual Basic for Applications Project with a password. You must supply the password in the Visual Basic Editor before you can perform this operation.@@@1@@@1 | Microsoft幫助使用密碼保護此Visual Basic for Applications項目。必須先在Visual Basic編輯器中提供密碼，然后才能執行此操作。@@@ 1 @@@@ 1 |
| 2018 | The data access page name '|' you entered is misspelled or refers to a data access page that isn't open or doesn't exist.@@@1@@@1 | 數據訪問頁面名稱“ |” 您輸入的拼寫錯誤或指向的數據訪問頁面未打開或不存在。@@@ 1 @@@@ 1 |
| 2019 | The number you used to refer to the data access page is invalid.@Use the Count property to count the open data access pages and make sure that the page number is not greater than the number of open data access pages minus one.@@1@4@2019460@1 | 您用來引用數據訪問頁的編號無效。@使用Count屬性對打開的數據訪問頁進行計數，并確保頁號不大于打開的數據訪問頁的數量減一。@@ 1 @ 4 @ 2019460 @ 1 |
| 2021 | One or more operators in the filter expression is invalid.@For a valid list of operators refer to the help file@@1@@@1 | 過濾器表達式中的一個或多個運算符無效。@有關有效的運算符列表，請參閱幫助文件@@ 1 @@@@ 1 |
| 2022 | You entered an expression that requires a data access page to be the active window.@@@1@2@5601@1 | 您輸入的表達式需要將數據訪問頁設置為活動窗口。@@@ 1 @ 2 @ 5601 @ 1 |
| 2024 | The report snapshot was not created because you don't have enough free disk space for temporary work files.@To fix this, free up disk space (for example, empty the Recycle Bin or delete unnecessary files).@@1@@@1 | 未創建報告快照，因?yàn)槟鷽](méi)有足夠的可用磁盤空間來存儲臨時工作文件。@要解決此問題，請釋放磁盤空間（例如，清空回收站或刪除不必要的文件）。@@ 1 @@@ 1個 |
| 2025 | The file is not in the correct format for a Microsoft Access project.@@@1@@@1 | 該文件的格式不是Microsoft Access項目的正確格式。@@@ 1 @@@@ 1 |
| 2027 | This operation is not supported for Microsoft Access 1.X databases.@@@1@@@1 | Microsoft Access 1.X數據庫不支持此操作。@@@ 1 @@@ 1 |
| 2028 | Microsoft Access was unable to close the database object. | Microsoft Access無法關閉數據庫對象。 |
| 2029 | Microsoft Office applications cannot suspend while you have documents open from a network location. Exit the applications or close the open documents and try again. | 當您從網絡位置打開文檔時，Microsoft Office應用程序無法掛起。退出應用程序或關閉打開的文檔，然后重試。 |
| 2030 | The Microsoft Access project '|1' will be opened read-only because one of the following occurred:@Either the file is locked for editing by another user, the file (or the folder in which it is located) is marked as read-only, or you specified that you wanted to open the file read-only.@@3@@@1 | Microsoft Access項目“ | 1”將以只讀方式打開，因?yàn)榘l(fā)生以下情況之一：@要么該文件被鎖定以供其他用戶編輯，要么將該文件（或它所在的文件夾）標記為已讀-僅@，或者您指定要以只讀方式打開文件。@@ 3 @@@ 1 |
| 2031 | You can't convert or enable an MDE file.@@@1@@@1 | 您無法轉換或啟用MDE文件。@@@ 1 @@@ 1 |
| 2033 | Name conflicts with existing module, project, or object library.@@@1@@@1 | 名稱與現有模塊，項目或?qū)ο髱?kù)沖突。@@@ 1 @@@@ 1 |
| 2034 | Cannot Compile Project.@@@1@@@1 | 無法編譯項目。@@@ 1 @@@ 1 |
| 2035 | Cannot Load Project of wrong version.@@@1@@@1 | 無法加載錯誤版本的項目。@@@ 1 @@@ 1 |
| 2037 | Microsoft Access could not perform name AutoCorrect during this operation. The 'Log name AutoCorrect' option is set, but the Data and Misc. Objects is not checked out.@@@1@@@3 | 在此操作過程中，Microsoft Access無法執行名稱自動更正。設置了“日志名稱自動更正”選項，但設置了“數據和雜項”。對象未檢出。@@@ 1 @@@ 3 |
| 2038 | The file '|' cannot be opened because it has been locked by another user. | 文件“ |” 無法打開，因?yàn)樗驯涣硪粋€(gè)用戶鎖定。 |
| 2040 | Microsoft Access can't run.@@@1@@@3 | Microsoft Access無法運行。@@@ 1 @@@ 3 |
| 2041 | Microsoft Access couldn't find file '|1'. This file is required for startup. | Microsoft Access找不到文件“ | 1”。該文件是啟動所必需的。 |
| 2042 | A system error occurred, or there isn't enough free memory to start Microsoft Access. Close unneeded programs and try again. | 發生系統錯誤，或者沒有足夠的可用內存來啟動Microsoft Access。關閉不需要的程序，然后重試。 |
| 2043 | Microsoft Access can't find the database file '|1.'@Make sure you entered the correct path and file name.@@1@@@1 | Microsoft Access找不到數據庫文件“ | 1”。@確保輸入了正確的路徑和文件名。@@ 1 @@@@ 1 |
| 2044 | You can't exit Microsoft Access now.@If you're running a Visual Basic module that is using OLE or DDE, you may need to interrupt the module.@@1@@@1 | 您現在不能退出Microsoft Access。@如果您正在運行使用OLE或DDE的Visual Basic模塊，則可能需要中斷該模塊。@@ 1 @@@@ 1 |
| 2045 | The command line you used to start Microsoft Access contains an option that Microsoft Access doesn't recognize.@Exit and restart Microsoft Access using valid command-line options.@@1@@@1 | 您用于啟動Microsoft Access的命令行包含Microsoft Access無法識別的選項。@退出并使用有效的命令行選項重新啟動Microsoft Access。@@ 1 @@@@ 1 |
| 2046 | The command or action '|1' isn't available now.@* You may be in a read-only database or an unconverted database from an earlier version of Microsoft Access. * The type of object the action applies to isn't currently selected or isn't in the active view.@Use only those commands and macro actions that are currently available for this database.@1@@@1 | 命令或操作'| 1'現在不可用。@ *您可能位于只讀數據庫中，或者位于Microsoft Access早期版本中未轉換的數據庫中。*該操作所適用的對象類型當前未選定或不在活動視圖中。@僅使用該數據庫當前可用的那些命令和宏操作。@ 1 @@@ 1 |
| 2048 | There isn't enough free memory to open the file '|.'@Close unneeded programs and try again. For more information on freeing memory, search the Microsoft Windows Help index for 'memory, troubleshooting'.@@1@@@1 | 沒有足夠的可用內存來打開文件'|。'@@關閉不需要的程序，然后重試。有關釋放內存的更多信息，請?jiān)贛icrosoft Windows幫助索引中搜索“內存，故障排除”。@@ 1 @@@ 1 |
| 2050 | Enter an OLE/DDE Timeout setting from 0 through 300 seconds.@@@1@@@1 | 輸入0到300秒之間的OLE / DDE超時設置。@@@ 1 @@@ 1 |
| 2051 | The object name '|1' can't be longer than |2 characters according to Microsoft Access object-naming rules.@@@1@@@1 | 根據Microsoft Access對象命名規則，對象名稱'| 1'不能超過| 2個字符。@@@@ 1 @@@@ 1 |
| 2052 | There isn't enough free memory to update the display. Close unneeded programs and try again. | 沒有足夠的可用內存來更新顯示。關閉不需要的程序，然后重試。 |
| 2053 | The command name can't be blank.@Please choose a name.@@1@@@1 | 命令名稱不能為空。@請選擇名稱。@@ 1 @@@@ 1 |
| 2054 | Microsoft Access is unable to load the Visual Basic for Applications dynamic-link library (DLL) Vbe7.@Rerun the Microsoft Access Setup program.@@1@@@3 | Microsoft Access無法加載Visual Basic for Applications動態鏈接庫（DLL）Vbe7。@重新運行Microsoft Access安裝程序。@@ 1 @@@ 3 |
| 2055 | The expression '|' you entered is invalid.@@@1@1@11732@1 | 表達式“ |” 您輸入的內容無效。@@@ 1 @ 1 @ 11732 @ 1 |
| 2056 | Microsoft Access can't supply context-sensitive Help.@@@1@@@1 | Microsoft Access無法提供上下文相關的幫助。@@@ 1 @@@@ 1 |
| 2057 | There isn't enough stack memory left to perform the operation.@The operation is too complicated. Try simplifying the operation.@@1@@@3 | 沒有足夠的堆棧內存來執行該操作。@該操作太復雜。嘗試簡化操作。@@ 1 @@@ 3 |
| 2058 | The file '|1' is incompatible. Microsoft Access needs to be reinstalled.@Run Setup to reinstall Microsoft Access. If you want to preserve your security or custom settings, back up the Microsoft Access workgroup information file. For more information on backing up files, search the Microsoft Windows Help index for 'backing up files'.@@1@@185309@3 | 文件'| 1'不兼容。需要重新安裝Microsoft Access。@運行安裝程序以重新安裝Microsoft Access。如果要保留安全性或自定義設置，請備份Microsoft Access工作組信息文件。有關備份文件的更多信息，請?jiān)贛icrosoft Windows幫助索引中搜索“備份文件”。@@ 1 @@ 185309 @ 3 |
| 2059 | Microsoft Access cannot find the object '|1'.@Make sure the object exists and that you spell its name correctly.@@1@@@1 | Microsoft Access找不到對象“ | 1”。@確保對象存在并且您正確拼寫了它的名稱。@@ 1 @@@@ 1 |
| 2060 | You can't create a field list based on the action query '|.'@Action queries don't have fields. A form or report must be based on a table, or on a select or crosstab query.@Change the RecordSource property for the form or report, or open the action query and change it to a select query.@1@1@9232@1 | 您不能基于動作查詢“ |”創建字段列表。@動作查詢沒有字段。表單或報表必須基于表，選擇查詢或交叉表查詢。@更改表單或報表的RecordSource屬性，或打開操作查詢并將其更改為選擇查詢。@ 1 @ 1 @ 9232 @ 1個 |
| 2061 | Enter a zero or greater-than-zero number for this option.@@@1@@@1 | 輸入零或大于零的數字作為此選項。@@@ 1 @@@@ 1 |
| 2062 | The command name must be shorter than 255 Characters.@Please choose a name.@@1@@@1 | 命令名稱必須少于255個字符。@請選擇一個名稱。@@ 1 @@@@ 1 |
| 2063 | Microsoft Access can't create, open, or write to the index file '|1'; the information (.inf) file it uses to keep track of dBASE indexes.@The index file may be damaged, or you may not have read/write permission for the network drive you're trying to link to.@You can link to the dBASE file without specifying any dBASE indexes, but the existing indexes will not be used with the linked table.@1@@@1 | Microsoft Access無法創建，打開或?qū)懭胨饕募?| 1”；用于跟蹤dBASE索引的信息（.inf）文件。@索引文件可能已損壞，或者您可能沒有要嘗試鏈接到的網絡驅動器的讀/寫權限。@您可以鏈接到dBASE文件，但未指定任何dBASE索引，但是現有索引將不與鏈接表一起使用。@ 1 @@@ 1 |
| 2064 | The menu bar value '|' is invalid.@You supplied an argument to the DoMenuItem method that refers to a menu bar that is invalid.@Use an intrinsic constant or numeric value that refers to a valid menu bar value, such as acFormbar.@1@1@11895@1 | 菜單欄值“ |” 無效。@您向DoMenuItem方法提供了一個參數，該參數引用了無效的菜單欄。@使用內在常量或數字值引用了有效的菜單欄值，例如acFormbar。@ 1 @ 1 @ 11895 @ 1個 |
| 2065 | The name for the menu, command, or subcommand you entered is invalid.@You supplied an argument to the DoMenuItem method that refers to a menu name, command, or subcommand that is invalid.@Use an intrinsic constant or numeric value that refers to a valid menu, command, or subcommand value, such as acRecordsMenu.@1@1@11895@1 | 您輸入的菜單，命令或子命令的名稱無效。@您向DoMenuItem方法提供了一個參數，該參數引用了無效的菜單名稱，命令或子命令。@使用內部常量或數值引用了有效的菜單，命令或子命令值，例如acRecordsMenu。@ 1 @ 1 @ 11895 @ 1 |
| 2067 | A menu bar macro can only be run if the menu bar macro name is the setting used by particular properties or options.@You tried to run a menu bar macro containing the AddMenu action. Set one of the following properties or options to the name of the menu bar macro: * The MenuBar property of a form or report. * The ShortcutMenuBar property of a form, report, or control. * The Menu Bar or Shortcut Menu Bar option in the Startup dialog box. This error also occurs if Microsoft Access attempts to run a menu bar macro containing an AddMenu action that follows an action that makes some other object the active object. For example, the OpenForm action.@@2@1@3704@1 | 僅當菜單欄宏名稱是特定屬性或選項使用的設置時，才能運行菜單欄宏。@您試圖運行包含AddMenu操作的菜單欄宏。將以下屬性或選項之一設置為菜單欄宏的名稱：*表單或報表的MenuBar屬性。*表單，報表或控件的ShortcutMenuBar屬性。*“啟動”對話框中的“菜單欄”或“快捷菜單欄”選項。如果Microsoft Access嘗試運行包含一個AddMenu操作的菜單欄宏，該操作跟隨使某個其他對象成為活動對象的操作，則也會發生此錯誤。例如，OpenForm操作。@@ 2 @ 1 @ 3704 @ 1 |
| 2068 | The selected item is customized and doesn't have context-sensitive Help.@For more information on creating custom Help for a form, report, or control, click Help.@@2@1@10930@1 | 所選項目是自定義的，沒有上下文相關的幫助。@有關為表單，報表或控件創建自定義幫助的更多信息，請單擊幫助。@@ 2 @ 1 @ 10930 @ 1 |
| 2069 | The key or key combination |1 in |2 has invalid syntax or is not allowed.@Use the SendKeys syntax to specify the key or key combinations. For the allowed key or key combinations, click Help.@@2@1@10144@1 | | 2中的鍵或組合鍵| 1的語法無效或不允許使用。@使用SendKeys語法指定鍵或組合鍵。有關允許的鍵或組合鍵，請單擊“幫助”。@@ 2 @ 1 @ 10144 @ 1 |
| 2070 | You already assigned the key or key combination |1 in |2 to another macro.@Only the first key or key combination will be used.@@2@1@10144@1 | 您已經將| 2中的按鍵或組合鍵| 1分配給了另一個宏。@僅使用第一個按鍵或組合鍵。@@ 2 @ 1 @ 10144 @ 1 |
| 2071 | The Docking property can't be set to '|1' at this time.@If you want to set the Docking property to '|2', move the toolbar from its current position and try again.@@1@@@1 | 目前無法將Docking屬性設置為'| 1'。@如果要將Docking屬性設置為'| 2'，請將工具欄從當前位置移開，然后重試。@@ 1 @@@@ 1 |
| 2072 | All objects were imported successfully. | 所有對象均已成功導入。 |
| 2073 | Successfully exported '|'. | 成功導出“ |”。 |
| 2074 | This operation is not supported within transactions.@@@1@@@1 | 交易中不支持此操作。@@@ 1 @@@@ 1 |
| 2075 | This operation requires an open database.@@@1@@@1 | 此操作需要打開的數據庫。@@@ 1 @@@@ 1 |
| 2076 | Successfully linked '|'. | 成功鏈接“ |”。 |
| 2077 | This Recordset is not updatable | 該記錄集不可更新 |
| 2078 | Help isn't available due to lack of memory or improper installation of Microsoft Windows or Microsoft Access.@For more information on troubleshooting a low memory problem, search the Microsoft Windows Help index for 'memory, troubleshooting'.@If you need to reinstall Microsoft Access, you may want to preserve your security or custom settings. To do so, back up the Microsoft Access workgroup information file. For more information on backing up files, search the Microsoft Windows Help index for 'backing up files'.@1@@@3 | 由于內存不足或Microsoft Windows或Microsoft Access安裝不正確而無法獲得幫助。@有關解決內存不足問題的詳細信息，請?jiān)贛icrosoft Windows幫助索引中搜索“內存，故障排除”。@如果需要重新安裝Microsoft Access，您可能想要保留安全性或自定義設置。這樣做，備份Microsoft Access工作組信息文件。有關備份文件的更多信息，請?jiān)贛icrosoft Windows幫助索引中搜索“備份文件”。@ 1 @@@ 3 |
| 2079 | Form is read-only, because the Unique Table property is not set. | 窗體是只讀的，因?yàn)槲丛O(shè)置唯一表屬性。 |
| 2080 | The toolbar or menu | already exists.@Do you want to replace the existing toolbar or menu?@@19@@@2 | 工具欄或菜單| @已經存在。@是否要替換現有的工具欄或菜單？@@ 19 @@@ 2 |
| 2081 | The Create From Macro command only works when a macro is selected in the Navigation Pane.@@@1@@@1 | 僅當在導航窗格中選擇了宏時，“從宏創建”命令才起作用。@@@ 1 @@@@ 1 |
| 2083 | The database '|' is read-only.@You can't save changes made to data or object definitions in this database.@@1@@@1 | 數據庫“ |” 是只讀的。@您無法在此數據庫中保存對數據或?qū)ο蠖x所做的更改。@@ 1 @@@@ 1 |
| 2084 | Field '|' is based on an expression and can't be edited | 字段“ |” 基于表達式，無法編輯 |
| 2085 | The ODBC Refresh Interval setting must be from 1 through 32,766 seconds.@@@1@@@1 | ODBC刷新間隔設置必須介于1到32,766秒之間。@@@ 1 @@@@ 1 |
| 2086 | Recordset requires a form to be updatable. | 記錄集要求表單是可更新的。 |
| 2087 | Microsoft Access can't display the Add-ins submenu.@The Add-ins submenu expression '|1' you entered exceeds the 256-character limit.@Shorten the macroname or functionname expression in the Menu Add-ins key of the Windows Registry setting, and then restart Microsoft Access. For more information on customizing Microsoft Access settings in the Windows Registry, click Help.@2@1@9015@3 | Microsoft Access無法顯示“加載項”子菜單。@您輸入的“加載項”子菜單表達式“ | 1”超出了256個字符的限制。@在Windows注冊表的“菜單加載項”中縮小宏名或函數名表達式設置，然后重新啟動Microsoft Access。有關在Windows注冊表中自定義Microsoft Access設置的更多信息，請單擊Help。@ 2 @ 1 @ 9015 @ 3 |
| 2088 | Microsoft Access can't display the Add-ins submenu |1 because a setting you entered in the Windows Registry is missing a macro name or function name expression.@@Supply the missing expression in the Menu Add-ins key of the Windows Registry, and then restart Microsoft Access. For more information on customizing Microsoft Access settings in the Windows Registry, click Help.@2@1@9015@3 | Microsoft Access無法顯示“加載項”子菜單| 1，因?yàn)槟赪indows注冊表中輸入的設置缺少宏名或函數名表達式。@@在Windows注冊表的“菜單項”項中提供缺少的表達式，然后重新啟動Microsoft Access。有關在Windows注冊表中自定義Microsoft Access設置的更多信息，請單擊Help。@ 2 @ 1 @ 9015 @ 3 |
| 2089 | Microsoft Access can't display the same menu more than once in a menu bar.@@@1@1@3704@1 | Microsoft Access不能在菜單欄中多次顯示同一菜單。@@@ 1 @ 1 @ 3704 @ 1 |
| 2090 | An action within the current global menu's macro group can't change the global menu bar.@Microsoft Access can't display the global menu bar because the macro called when you first set the global menu includes another action that tries to reset the global menu.@Check your menu bar macros, and make sure that you set the global menu bar only once.@1@@@1 | 當前全局菜單的宏組中的操作不能更改全局菜單欄。@ Microsoft Access無法顯示全局菜單欄，因?yàn)榈谝淮卧O(shè)置全局菜單時調用的宏包括另一個嘗試重置全局菜單的操作。@檢查菜單欄宏，并確保僅設置一次全局菜單欄。@ 1 @@@ 1 |
| 2091 | '|' is an invalid name.@@@1@@@1 | |' 是無效的名稱。@@@ 1 @@@@ 1 |
| 2092 | The value you specified for the Setting argument in the SetOption method is not the correct type of Variant for this option.@You specified a string when Microsoft Access expected a number.@See the Access Options dialog box (click the File tab, and then click Access Options) to see what type of data is required to set this particular option. For example, the setting for the Default Database Folder option must be a string. To see what type of Variant you passed to the SetOption method, use the VarType function. For more information, search the Help index for 'Variant data type' and 'VarType function'.@1@@@0 | 您在SetOption方法中為Setting參數指定的值不是此選項的正確類型。@當Microsoft Access需要數字時，您指定了一個字符串。@請參閱“訪問選項”對話框（單擊“文件”選項卡，然后單擊“確定”）。單擊訪問選項）以查看設置此特定選項所需的數據類型。例如，“默認數據庫文件夾”選項的設置必須為字符串。若要查看傳遞給SetOption方法的Variant類型，請使用VarType函數。有關更多信息，請?jiān)趲椭饕兴阉鳌白兞繑?shù)據類型”和“變量類型函數”。@ 1 @@@ 0 |
| 2093 | The numeric value for the Setting argument in the SetOption method does not correspond to any list box or option group settings in the Access Options dialog box.@Valid settings are 0 (the first item in the list) through | (the last item in the list).@@1@1@6210@1optimize.ids | SetOption方法中Set參數的數字值與“訪問選項”對話框中的任何列表框或選項組設置都不對應。@有效設置為0（列表中的第一項）至|。（列表中的最后一項）。@@ 1 @ 1 @ 6210 @ 1optimize.ids |
| 2094 | Microsoft Access cannot find the toolbar '|1.'@You tried to run a macro that includes a ShowToolbar action or a Visual Basic for Applications procedure that includes a ShowToolbar method. * The toolbar name might be misspelled or might refer to a legacy toolbar that is no longer available. * This action might refer to a custom toolbar that was deleted from or renamed in the current database. * This action might refer to a custom toolbar that exists in a different database.@@1@1@6458@1 | Microsoft Access找不到工具欄“ | 1”。@您試圖運行包含ShowToolbar操作的宏或包含ShowToolbar方法的Visual Basic for Applications過程。*工具欄名稱可能拼寫錯誤，或者可能引用了不再可用的舊版工具欄。*此操作可能引用自當前數據庫中刪除或重命名的自定義工具欄。*此操作可能引用存在于不同數據庫中的自定義工具欄。@@ 1 @ 1 @ 6458 @ 1 |
| 2097 | The table for which you tried to create an import/export specification was created in an earlier version of Microsoft Access.@To convert this database to the current version of Microsoft Access, click the File tab, and then click 'Convert'.@@1@@@0 | 您試圖為其創建導入/導出規范的表是在Microsoft Access的早期版本中創建的。@要將此數據庫轉換為Microsoft Access的當前版本，請單擊“文件”選項卡，然后單擊“轉換”。@@ 1 @@@ 0 |
| 2098 | The operation could not be completed because the Action Tag '|' is not recognized by your system.@@@1@@@1 | 操作標簽為“ |”，因此無法完成該操作 無法被您的系統識別。@@@ 1 @@@ 1 |
| 2100 | The control or subform control is too large for this location.@The number you entered for the Left, Top, Height, or Width property is too large or is a negative number.@Reduce the size of the control or subform control, or enter a positive number.@1@@@1 | 控件或子窗體控件對于此位置太大。@您為“左”，“頂部”，“高度”或“寬度”屬性輸入的數字太大或?yàn)樨?fù)數。@減小控件或子窗體控件的大小，或輸入一個正數。@ 1 @@@ 1 |
| 2101 | The setting you entered isn't valid for this property.@To see the valid settings for this property, search the Help index for the name of the property.@@1@@@1 | 您輸入的設置對此屬性無效。@要查看此屬性的有效設置，請?jiān)凇皫椭彼饕兴阉鲗傩悦Q(chēng)。@@ 1 @@@@ 1 |
| 2102 | The form name '|' is misspelled or refers to a form that doesn't exist.@If the invalid form name is in a macro, an Action Failed dialog box will display the macro name and the macro's arguments after you click OK. Open the Macro window, and enter the correct form name.@@1@@@1 | 表單名稱“ |” 拼寫錯誤或引用的表單不存在。@如果無效的表單名稱在宏中，則單擊“確定”后，“操作失敗”對話框?qū)@示宏名稱和宏的參數。打開宏窗口，然后輸入正確的表單名稱。@@ 1 @@@@ 1 |
| 2103 | The report name '|' you entered in either the property sheet or macro is misspelled or refers to a report that doesn't exist.@If the invalid report name is in a macro, an Action Failed dialog box will display the macro name and the macro's arguments after you click OK. Open the Macro window, and enter the correct report name.@@1@@@1 | 報告名稱“ |” 您在屬性表或宏中輸入的拼寫錯誤或引用的報告不存在。@如果無效的報告名稱在宏中，則單擊“操作失敗”對話框后，將顯示宏名稱和宏的參數好。打開宏窗口，然后輸入正確的報告名稱。@@ 1 @@@@ 1 |
| 2104 | You entered the control name '|,' which is already in use.@You already have a control on the form with this name, or an existing control has its name mapped to this name for Visual Basic. Visual Basic maps spaces in control names to underscores. For example, My Control and My_Control are treated as duplicate names.@@1@1@11734@1 | 您輸入的控件名稱“ |”已在使用中。@您已經在具有此名稱的窗體上擁有一個控件，或者對于Visual Basic，現有控件的名稱已映射到該名稱。Visual Basic將控件名稱中的空格映射到下劃線。例如，“我的控件”和“我的控件”被視為重復的名稱。@@ 1 @ 1 @ 11734 @ 1 |
| 2105 | You can't go to the specified record.@You may be at the end of a recordset.@@1@@@1 | 您無法轉到指定的記錄。@您可能在記錄集的末尾。@@ 1 @@@@ 1 |
| 2106 | |1 errors occurred when you loaded the form or report.@You loaded a form or report that has controls or properties that Microsoft Access doesn't recognize and will ignore.@@1@@@1 | | 1加載表單或報表時發生錯誤。@您加載的表單或報表具有Microsoft Access無法識別并且將忽略的控件或?qū)傩?。@@ 1 @@@ 1 |
| 2107 | The value you entered does not meet the validation rule defined for the field or control.@To see the validation rule, switch to Design view or Layout view, click the appropriate field, and then, if the property sheet is not open, press F4. Then, click the Data tab in the property sheet.@Enter a value that meets the validation rule, or press ESC to undo your changes.@1@1@11730@1 | 您輸入的值不符合為該字段或控件定義的驗證規則。@要查看驗證規則，請切換到“設計”視圖或“布局”視圖，單擊相應的字段，然后，如果未打開屬性表，請按F4 。然后，單擊屬性表中的“數據”選項卡。@輸入符合驗證規則的值，或按ESC撤消更改。@ 1 @ 1 @ 11730 @ 1 |
| 2108 | You must save the field before you execute the GoToControl action, the GoToControl method, or the SetFocus method.@You tried to move the focus to another control using the SetFocus method, GoToControl action, or the GoToControl method.@Set the macro or method to the AfterUpdate property instead of the BeforeUpdate property so it saves the field before changing the focus.@1@1@6314@1 | 在執行GoToControl操作，GoToControl方法或SetFocus方法之前，必須保存該字段。@您嘗試使用SetFocus方法，GoToControl操作或GoToControl方法將焦點移至另一個控件。@設置宏或方法設置為AfterUpdate屬性而不是BeforeUpdate屬性，以便在更改焦點之前保存該字段。@ 1 @ 1 @ 6314 @ 1 |
| 2109 | There is no field named '|' in the current record.@@@1@@@1 | 沒有名為“ |”的字段 在當前記錄中。@@@ 1 @@@ 1 |
| 2110 | Microsoft Access can't move the focus to the control |1.@* The control may be a type that can't receive the focus, such as a label. * The control's Visible property may be set to No. * The control's Enabled property may be set to No.@@1@1@3016@1 | Microsoft Access無法將焦點移至控件| 1。@ *控件可能是無法接收焦點的類型，例如標簽。*控件的Visible屬性可以設置為No。*控件的Enabled屬性可以設置為No。@@@ 1 @ 1 @ 3016 @ 1 |
| 2111 | The changes you made can't be saved.@The save operation may have failed due to the temporary locking of the records by another user. * Click OK to try again. You may need to click OK several times (or wait until the other user closes the table). * Click Cancel if repeated attempts to save your changes fail.@@3@@@1 | 您所做的更改無法保存。@保存操作可能由于另一個用戶臨時鎖定記錄而失敗。*單擊確定重試。您可能需要多次單擊“確定”（或等待其他用戶關閉表格）。*如果重復嘗試保存更改失敗，請單擊取消。@@ 3 @@@ 1 |
| 2112 | The item on the Clipboard can't be pasted into this control.@@@1@@@1 | 剪貼板上的項目無法粘貼到此控件中。@@@ 1 @@@@ 1 |
| 2113 | The value you entered isn't valid for this field.@For example, you may have entered text in a numeric field or a number that is larger than the FieldSize setting permits.@@1@@@1 | 您輸入的值對此字段無效。@例如，您可能在數字字段或大于FieldSize設置允許的數字中輸入了文本。@@ 1 @@@ 1 |
| 2114 | Microsoft Access doesn't support the format of the file '|1,' or file is too large. Try converting the file to BMP format.@@@1@@@1 | Microsoft Access不支持文件“ | 1”的格式，或者文件太大。嘗試將文件轉換為BMP格式。@@@ 1 @@@@ 1 |
| 2115 | The macro or function set to the BeforeUpdate or ValidationRule property for this field is preventing Microsoft Access from saving the data in the field.@* If this is a macro, open the macro in the Macro window and remove the action that forces a save (for example, GoToControl). * If the macro includes a SetValue action, set the macro to the AfterUpdate property of the control instead. * If this is a function, redefine the function in the Module window.@@1@@@1 | 將該字段設置為BeforeUpdate或ValidationRule屬性的宏或函數會阻止Microsoft Access在該字段中保存數據。@ *如果是宏，請?jiān)凇昂辍贝翱谥写蜷_(kāi)該宏，然后刪除強制執行保存操作（例如GoToControl）。* |
| 聯系人： | 王先生 |
|---|---|
| Email： | 18449932@qq.com |
| QQ： | 18449932 |
| 微博： | officecn01 |
|
移動訪問
|